 |
|  |
|
Specifications and Requirements
|
 |
Feed Pressure
AquaPro operates flawlessly with pressures ranging from 2 psi (equal to the gravity of a 1.5 m (5ft) drop) up to a high pressure of 45 psi. AquaPro reaches its optimal fill speed with a pressure of 15 psi. However, if speed is crucial, AquaPro can operate with pressures up to 45 psi, which allows it to be used with high-pressure water delivery systems. If the feed pressure is higher than 15 psi, hose clamps must be installed at each connection. |
 |
Operation Below Freezing Point
Batteries equipped with AquaPro can be used in freezing temperatures. However, batteries must be returned to normal temperature prior to watering. |
|
|
 |
 |
| 35mm Push-In fill caps |
All other fill caps |
|
Floats for the AquaPro Fill cap are available in two diameter sizes with 8 varieties of float length each. These Snap-On floats are completely interchangeable allowing for easy, precise adjustments to the battery. The 0.95" (24 mm) diameter is the standard diameter size; the 0.71" (18mm) can be used if, for example, if the vent opening is to small to allow the use of the standard 1" diameter float. All floats are color coded and numbered to make it easy to distinguish the float length without measuring. Use the convenient float gauge to determine the float length needed. |
24 / 44 |
24 / 48 |
24 / 52 |
24 / 56 |
24 / 60 |
24 / 66 |
24 / 71 |
24 / 75 |
18 / 44 |
18 / 48 |
18 / 52 |
18 / 56 |
18 / 60 |
18 / 66 |
18 / 71 |
18 / 75 |
|
|
